Episode
Arizona Gold & Silver reports up to 99% gold recovery at Philadelphia project
- Published
- Jun 30, 2026
- Duration seconds
- 148
- Processing state
not_requested
Actions
POST https://stenobird.com/v1/public/podcasts/proactive-interviews-for-investors-1457173/episodes/arizona-gold-silver-reports-up-to-99-gold-recovery-at-philadelphia-project/transcription-requests
Idempotently request low-priority transcript generation for this episode.GET https://stenobird.com/podcast/proactive-interviews-for-investors-1457173/arizona-gold-silver-reports-up-to-99-gold-recovery-at-philadelphia-project.md
Read the agent-friendly Markdown representation of this episode resource.
Summary
Arizona Gold and Silver CEO Mike Stark joined Steve Darling from Proactive to discuss encouraging metallurgical test results from the Philadelphia gold-silver project in Mohave County, Arizona, highlighting strong gold recoveries through both agitation and heap leach processing. Stark said agitation leach cyanidation achieved gold recoveries of 91% to 99% using modest grind sizes of 0.40 to 0.136 mm (40–110 mesh). More than 50% of the total gold was recovered within the first 10 days of column leaching, demonstrating rapid extraction characteristics. Heap leach testing also delivered positive results, with 84% gold recovery from bulk material crushed to -6.3 mm using high-pressure grinding rolls (HPGR) over a 177-day leach cycle. Regression analysis indicates recoveries could increase to approximately 86% over 360 days. Silver recoveries ranged from 49% to 72% through agitation leaching, while heap leach processing achieved 37% silver recovery. Testing also showed that HPGR crushing improved gold recovery by 12% compared with conventional crushing methods, while silver recovery improved by approximately 3%. Agglomeration and compaction testing demonstrated that the crushed material is suitable for heap stacking heights of 10 to more than 30 metres with the addition of only 2 to 4 kilograms of cement per tonne, supporting the project's heap leach potential. Based on the results, management believes higher-grade material could be processed through agitation cyanide leaching to maximize gold and silver recovery, while lower-grade ore could be treated economically through HPGR-assisted heap leaching. The metallurgical work was conducted on a 415.5-kilogram bulk sample collected from the current surface operation. Head assays returned 1.929 to 1.988 g/t gold and 2.82 to 3.3…