# Additive Manufacturing on the Shop Floor: Hype, Reality, and Where It Actually Works, Ep #37

Page: https://stenobird.com/podcast/lights-out-technology-and-automation-podcast-by-makingchips-7058706/additive-manufacturing-on-the-shop-floor-hype-reality-and-where-it-actually-works-ep-37
Text version: https://stenobird.com/podcast/lights-out-technology-and-automation-podcast-by-makingchips-7058706/additive-manufacturing-on-the-shop-floor-hype-reality-and-where-it-actually-works-ep-37.md
Podcast: [Lights Out: Technology and Automation Podcast by MakingChips](https://stenobird.com/podcast/lights-out-technology-and-automation-podcast-by-makingchips-7058706)
Published: 2026-03-27T10:00:00+00:00
Episode link: https://8819970d-2c51-481c-b08a-4d2a806885b2.libsyn.com/additive-manufacturing-on-the-shop-floor-hype-reality-and-where-it-actually-works-ep-37
Audio file: https://dts.podtrac.com/redirect.mp3/traffic.libsyn.com/secure/8819970d-2c51-481c-b08a-4d2a806885b2/LO_037.mp3?dest-id=4707502
Processing state: not_requested
JSON: https://stenobird.com/v1/public/podcasts/lights-out-technology-and-automation-podcast-by-makingchips-7058706/episodes/additive-manufacturing-on-the-shop-floor-hype-reality-and-where-it-actually-works-ep-37
Duration seconds: 3147

## Resource

Additive manufacturing has been "the future" of manufacturing for decades. And yet, for many shops, it still feels just out of reach—either too expensive, too complex, or too uncertain to justify. So where does it actually stand today? In this episode of Lights Out , we sit down with Mark Barfoot, VP of Global Sales at Xact Metal, to cut through the noise. With more than two decades of experience in additive, Mark has seen the technology evolve from experimental curiosity to a legitimate production tool—and he brings a grounded, shop-floor perspective on what's real versus what's hype. We explore where additive is delivering real value right now, starting with jigs, fixtures, and tooling, and how shops are using those applications as a gateway into more advanced production parts. Along the way, we unpack the biggest misconceptions—especially the idea that additive is simply a cheaper way to make the same parts—and why success starts with designing for the technology, not forcing it into existing workflows. The conversation also dives into what it actually takes to bring metal additive into a machine shop—from facility requirements and safety considerations to the learning curve your team should expect. If you've ever wondered whether additive belongs in your shop (or how to even begin evaluating it), this episode gives you a clear, practical starting point. Because the real question isn't whether additive will replace traditional machining—it's where the two work better together. You will want to hear this episode if you are interested in... (0:00) Real-world additive use cases including jigs, fixtures, and lightweight tooling (2:19) Introducing Mark Barfoot and the current state of metal additive manufacturing (6:54) Understanding additive hype cycles and why adoption…

## Actions

- request_transcript: `POST https://stenobird.com/v1/public/podcasts/lights-out-technology-and-automation-podcast-by-makingchips-7058706/episodes/additive-manufacturing-on-the-shop-floor-hype-reality-and-where-it-actually-works-ep-37/transcription-requests` — Idempotently request low-priority transcript generation for this episode.
- read_markdown: `GET https://stenobird.com/podcast/lights-out-technology-and-automation-podcast-by-makingchips-7058706/additive-manufacturing-on-the-shop-floor-hype-reality-and-where-it-actually-works-ep-37.md` — Read the agent-friendly Markdown representation of this episode resource.

A page view does not enqueue transcription. Agents should invoke `request_transcript` explicitly when they need this episode processed.

## Transcript

Full transcripts are not published on public pages unless there is a clear rights basis.